Device Name:Melt flow rate testing machine

Equipment model:XBZ6400DMV

Main functions of the device:

Product Introduction:

Testing methods: mass method, volume method (MFR, MVR)

Display method: 7-inch color touch screen display

The melt index meter meets the requirements of GB/T3682-2000 standard, and the main parameters of the melt index meter also meet the requirements of ISO1133-97, ASTM1238, JIS and other standards. It can be used to measure the melt mass flow rate (MFR) or melt volume flow rate (MVR) of various plastic materials, such as polyethylene, polypropylene, polystyrene, ABS, polyamide, fiber resin, acrylic ester, polyformaldehyde, fluoroplastics, polycarbonate, etc, Widely used in plastic production, plastic products, petrochemical and other industries, as well as related universities, research institutions, and inspection departments.

Execution standards:

GB/T3682-2000 "Determination of Melt Flow Rate and Melt Volume Flow Rate of Thermoplastics"

ISO 1133:1997 "Determination of mass flow rate (MFR) and volume flow rate (MVR) of thermoplastic melts"

ASTM D1238 "Standard Test Method for Determining the Melt Flow Rate of Thermoplastics by Squeeze Plastometer"

Product features:

Color LCD display in both Chinese and English;

Integrated manual and automatic cutting, accurate to 0.1s, allowing for arbitrary setting of cutting time and number of times;

Dual temperature control system, with more precise temperature control accuracy and higher heating efficiency;

Dual imported sensors provide more precise temperature gradients between the upper and lower parts, allowing for independent use and improving service life;

The barrel is made of imported Hastelloy alloy nitriding treatment, and the mouth mold is made of carbon tungsten steel material, with practical materials;

The insulation bucket is made of all SUS304 stainless steel material, which will not rust at high temperatures for a long time;

Automatically calculate the results and print them out;

Built in micro printer, capable of printing test data;

Add displacement sensors to test MVR (volumetric method) with an accuracy of 0.01mm.

Volume method testing does not require cutting and can directly output test results

The density value of a material at a specific temperature can be calculated by the ratio of the volumetric method to the mass method

Main technical parameters:

Temperature range: 0 ℃ -450 ℃

Temperature fluctuation: ± 0.2 ℃

Temperature uniformity: ± 1 ℃

Temperature display resolution: 0.1 ℃

Time display resolution: 0.1S

Mouth diameter: Φ 2.095 ± 0.005mm

Discharge port length: 8.000 ± 0.025mm

Loading cylinder diameter: Φ 9.550 ± 0.007mm

Piston parameters: piston head Φ 9.474mm ± 0.007mm

Weight accuracy: ± 0.5%

Displacement measurement accuracy: 0.01mm

Timing accuracy of volumetric method: 0.001S

Displacement measurement encoder: Omron photoelectric rotary encoder

Quality method testing range: 0.1-150g/10min

Volume method testing range: 50-5000cm ³/ 10 minutes

Output method: Micro automatic printing output

Cutting method: manual and automatic cutting integrated

Test load: complete set of eight level weights

Power supply voltage: AC220V ± 10% 50HZ