Cold buried resin

1. The ratio of resin powder to resin water is 1:0.8 by weight

2. Prepare a container and a stirring rod first, and pour an appropriate amount of resin powder into a stirring cup.

3. Add an appropriate amount of resin water and slowly stir it evenly with a stirring rod (too fast can easily produce bubbles)

4. After stirring evenly (into a milky white thick liquid), pour it into the slicing mold

5. Curing will be completed in about 13-15 minutes (the temperature generated in the middle is a natural reaction phenomenon)

The proportion can be slightly adjusted according to specific requirements. The higher the powder ratio, the faster the curing speed and the poorer the relative fluidity! On the contrary, the appearance of the finished product is the opposite.

 quality guarantee period

Under natural ventilation conditions, it can be kept for two years.

Cold buried resin powder:

White powder with particle size below 100 microns, molecular weight between 150000 and 160000 Mw, and a colorless to slightly yellow transparent liquid hardener

1. After slicing and solidification, there is sufficient hardness and toughness

2. After slicing and polishing, there is sufficient brightness

3. The shrinkage rate before and after slicing solidification is extremely low